Selection Of Cable Bridge Type And Variety

1. When the cable network that needs to shield electrical interference or has the requirement of protecting external (such as corrosive liquid, flammable dust, etc.), the (FB) type trough type anti-corrosion shielding cable tray (with cover) should be selected.
2. Strong corrosive environment should be used (F) composite epoxy resin anti-corrosion flame retardant cable tray. The bracket and bracket should also use the same material to improve the service life of the bridge and accessories, and the cable bridge. Cover plate should be added in the environment or outdoor places that are easy to accumulate ash and other need to be covered.
3. In addition to the above, pallet type, trough type, step type, glass anti-corrosion and flame retardant cable bridge or steel ordinary bridge can be selected according to the site environment and technical requirements. Cover plate should be added in the environment or outdoor places that are easy to accumulate ash and other need to be covered.
4. In the public passage or outdoor across the road section, the bottom of the bottom rung should be added to the plate or the use of pallets in the section. When the long span crosses the public channel, the load capacity of the bridge can be improved or the row frame can be selected according to the user's requirements.
5. Large span (>3m) to choose composite bridge (FB).
6. Outdoor use of composite epoxy resin bridge (F).